How To Install A Utility Sink Next To Washer? (Explained)
Looking for How To Install A Utility Sink Next To Washer? Installing a utility sink next to your washer is a great way to add some extra counter space and storage to your laundry room. It’s also a great way to avoid carrying dirty laundry through the house. Decide where you want to install the sink.
The best place for the sink is usually next to the washing machine, but make sure that there is enough space for both appliances. Measure the space and purchase a sink that will fit. Be sure to take into account the size of the faucet and any other attachments that you may want to use.
- What Is A Utility Sink?
- Tools And Materials Needed:
- How to Install a Utility Sink Next To A Washer?
- Conclusion of How To Install A Utility Sink Next To Washer
What Is A Utility Sink?
A laundry sink is also called a utility sink. Utility sinks are often used for cleaning and washing clothes. This kind of sink is usually found in launderettes and washhouses. They use a clothes brush or clothes washer.
In most cases, utility sinks are 15 to 25 inches deep, which is ideal for rinsing or finding. Is it worth buying a utility sink? Certainly. A utility sink will make your work easier. If you get any color of blood or wine on your clothes, the cleaning solution will allow you to blot clean any spots.
With this sink, it does not take chemicals or warm water to remove blood stains or red wine off of your clothes. This would not be possible with a basic washing machine.
Tools And Materials Needed:
|1. Measuring gauge||6. PVC hand saw|
|2. Plumber’s glue||7. Wrench|
|3. Threading tools||8. Pliers|
|4. Flexible tubing||9. Two Brass splitters|
|5. PVC Y-fit||10. Sandpaper|
How to Install a Utility Sink Next To A Washer?
Turn off the water supply line
Are you tired of lugging your laundry baskets up and down stairs? Do you have a spare bedroom or laundry room that’s just collecting dust because it doesn’t have a sink? If so, it might be time to install a utility sink next to your washer. Not only will this make doing laundry much more convenient, but it will also free up space in your main bathroom.
Installing a utility sink is a relatively easy process, but it’s important to take your time and follow the instructions carefully. Because If you are installing a sink next to your washer, the first step is to turn off the water supply line.
The valve for the water supply line is usually located under the sink or behind the washing machine. Once you have turned off the water supply line, you can disconnect the old sink and install the new sink. Be sure to reconnect the water supply line before turning on the water.
Start Or Outset Measuring Drain
Installing a utility sink next to a washer can be a convenient way to have two sinks in one location. It is important to measure the size of the drain on the utility sink before purchasing one, as they vary in size. Determine the distance between the floor hook and your drain pipe connector.
Then, locate the water line for your present washer, paying close attention to the point at which it enters the floor/wall. Create a mark on your washer water line using the same measurement as you used for the utility sink drain line.
Next, you will install the new Y-fitting, which will be used to screw into your waterline. When the drain line is initially determined, caulk it on both sides of the wall and use a silicone-based adhesive to coat it before all else goes up.
Trim and attain prior to the air seal being in place at both ends of your wall for the very last installment. The silicone-based adhesive, like Liquid Silicone, should never be used in areas where there is a fire, such as when you are cooking or applying warmth.
Adjust the Size of the Drainpipe
Cutting the existing drain pipe is undoubtedly the first step. Plumb from the washer to just below the top of the utility sink area. Use a circular saw or a jigsaw to cut this down so you’ll need at least 24 inches to spare for whatever happens next. After that, hook up a new pipe that reaches about four feet high.
Your best bet is to use a threaded PVC pipe with a fitting to seal up the ends. When your pipe is cut, you can now be sure that your new drain tube is not too short by measuring from the top of the drainage system and comparing it to where you want the sink this will ensure that you have plenty of room for all the water flow.
After you cut the pipe, use tape to affix the pipe to the wall and then seal it together with the silicone sealant typically provided for the purpose. Make sure you seal it well enough so that you will not need to make any other holes in the drywall.
After the hole sealant is fastened, you won t have the ability to sink your utility sink on top because of the grant program s limitations. As much as possible, be sure to seal any custom-made pipe installation before installing a utility sink. Because you are ready to waterproof the pipe installation, there is no way anymore to make holes in the wall.
Once you’re done sealing the brand-new pipe installation with silicone sealant, you can move ahead and move on to install your new utility sink! By taking these steps, you will easily install your brand-new utility sink.
Attaching Y-fitting And Adding Laundry Sink
Installing a laundry sink next to your washer is a great way to add convenience and extra storage to your home. By attaching a Y-fitting to the water supply line, you can easily add a laundry sink to your home laundry area. Here are the steps you need to take to install a utility sink:
- Shut off the water supply valve and disconnect the old hose from the faucet.
- Connect the new hose to the faucet and turn on the water supply.
- Install the Y-fitting onto the water supply line using Teflon tape and fittings.
- Cut a hole in the cabinet below or behind your washer for the new sink and attach it using screws or brackets.
- Turn on the water and test for leaks.
Right now, you must locate where all the hot and cool water hookups are situated to your washer. You will use a water pipe fitting with one type of outlet. Next, disconnect the water pipe on the hot and cold connectors.
If the fitting is not correctly attached and the pipe exceeds the recommended length, cut the hose. Put a pail on the ground to catch any dripping water. Cut in the middle of the hose to stop the flow before the whole resource is exhausted.
Attach the Pipe Splitter
At the present time, turn the water line valve on the main water supply to both cold and hot water pipes using a wrench. It is essential to make certain that the connection is sound. You can use a wrench to confirm that the attachments you’ve made are sealed and firm.
You can now have two water lines for both hot and cold water supply; the first will go to the sink and the others. In order to balance the hot and cold water supply, remember to attach your shutoff to the hot and cold water valves.
Then, connect your washer to the wall pipe (ex-ante or new). Afterward, run a wrench or pliers to the lines in order to correctly secure the connections. Do make sure to reconnect the washer to the waterline (old or new) when you reconnect the splitter. Again, use tools or pliers to make sure the connections are correct.
Connect the Hoses
Calculate the distance that the flexible tubing has to go to reach the bottom of the drain. Now you must attach the flexible tubing to the cold and hot water supply lines of the coffeemaker. Tighten up the connection with a screw or nut. To reinforce the connection, you can use yellow and red tape for cold and hot water respectively. Carefully stick these tape colors to the right tubes.
Assembling the Utility Sink Faucet
Now your sink is linked to your current water source, you’re going to have to connect a faucet. Before you shut off your main water stream, be sure to follow the details below.
Sink faucet gaskets or putty can be used to mount the faucet. Before installing the faucet, drill an opening in the sink. Tap heads are often attached to the sink with bolts and rubber gaskets. Use plumber’s putty to create the pole even more secure.
Nuts commonly known as mounting nuts are used to hold the faucet end in place. Use a wrench from the bottom of the sink to tighten any loose screws or bolts. Extra sealant or putty may leak out of the faucet if it is tightened too much. As it dries, use a damp cloth and a putty knife to remove it.
Follow the hot and cold water lines from frigid to hot and secure them to the undersides of the faucet handles. These connectors can be locked with a wrench, pliers, or any other tools. It is usually done by hand, however, it is preferable to use one to secure the connection.
Turn on the water and examine for any leaks. You have now assembled your faucet. All that’s left to do is ensure that all parts were placed into alignment correctly. Reconnect the water supply and test the faucet for leaks. If you identify any problems, you’ll need to inspect them for damaged connections.
Ensure that the entire area is appropriately sealed and that all the connections are secure. You may also point the flashlight at gaps in the surroundings to help you find them more securely.
Conclusion of How To Install A Utility Sink Next To Washer
Although it is a simple and important thing to connect your water and drain lines with your washing machine, it can resemble a difficult task. Basically, all you need to do in order to make this process is to be patient.
Using the exact same water-connection setups will make your garage and laundry room more spacious and energy-efficient. Not only this, but your energy and water costs are going to decrease as well.
When resolving the plumbing dilemma, ensure that the hot water and main water valve are shut off, or serious difficulties may develop. Whenever your sink or washer has issues, it is essential to be careful when mixing the hot and cold water supply lines up.
You should now be better acquainted with the simple procedure of connecting your washer and utility sink to the same drain. While the connection between your washer and utility sink may be a long, involved job, it can be a successful DIY job.